The HM-5750 Series of Dead-weight Direct-shear machines, 有三种配置-模拟, digital and manual gauge measuring devices. These machines feature 洪堡's touch-screen monitor for test control. 除了, Models hm - 5750 a and hm - 5750 d provide four (4) integral and independent data acquisition channels, which can be utilized in 站-alone configurations or accessed through a LAN-networked computer using 洪堡‘s Next Software for control and data collection.
hm - 5750 a.3F
The hm - 5750 a Direct Shear machine is an economical choice for performing direct/residual shear tests utilizing the dead-weight method and analog measuring devices. The microprocessor-based system features a stepper-motor drive system and a 7" touch-screen display that allows the operator to control and monitor all test functions. 像所有的精英系列机器, the hm - 5750 a is built around 洪堡's integral, 4-channel data logger with touch-screen control, which allows the hm - 5750 a to be used as a 站alone device capable of full test control and data logging. It can also be controlled by a networked computer at any location with access to the network. The carriage accepts shear box squares up to 4.0”(100mm)内部尺寸. Forward and reverse measurements permit residual shear testing as 站ard. A built-in safety feature prevents the over加载 of the load measuring system. The hm - 5750 a is supplied complete with a 2,000 lbf (10kN) capacity load cell; 1" (25.4mm) horizontal strain transducer, and a 0.4" (10.2mm)垂直应变传感器.
Shear box assemblies and related accessories are not included and should be ordered separately
hm - 5750 d.3F
The hm - 5750 d Direct Shear machine is an economical choice for performing direct/residual shear tests utilizing the dead-weight method and digital measuring devices. The microprocessor-based system features a stepper-motor drive system and a 7" touch-screen display that allows the operator to control and monitor all test functions. 像所有的精英系列机器, the hm - 5750 d is built around 洪堡's integral, 4-channel data logger with touch-screen control, which allows the hm - 5750 d to be used as a 站alone device capable of full test control and data logging. It can also be controlled by a networked computer at any location with access to the network. The carriage accepts shear box squares up to 4.0”(100mm)内部尺寸. Forward and reverse measurements permit residual shear testing as 站ard. A built-in safety feature prevents the over加载 of the load measuring system. The hm - 5750 d is supplied complete with a 2,200 lbf (10kN) capacity load ring and two 1.0" x 0.0001" (25.40 x 0.002mm)数字指示灯.
Shear box assemblies and related accessories are not included and should be ordered separately
HM-5750.3F
The HM-5750 and hm - 5750 m Direct Shear machines are an economical choice for performing direct/residual shear tests utilizing the dead-weight method with load rings and dial gauges.
这些模型包括马车, 站, vertical load hanger and a balanced lever 加载 arm with a 10:1 ratio that reduces the weight required to perform tests. The micro-processor-based system features a stepper motor drive system and 7" touch-screen display.
The carriage accepts shear box squares up to 4.0”(100mm)内部尺寸. Forward and reverse measurements permit residual shear testing as 站ard. A built-in safety feature prevents the over travel of the load measuring system.The HM-5750 and hm - 5750 m are supplied complete with a 2,000 lbf (10kN) capacity load ring, 1.0" x 0.001" (25.4 x 0.01毫米)和0.5" x 0.0001" (12 x 0.002mm)刻度盘指示.
Shear box assemblies and related accessories are not included and should be ordered separately
For information about converting your older 洪堡 product to the current model, 点击这里.